Vertical PST 25 SC

Compressed air / Automatic in line passage

The shotblasting machines with roller conveyor PST-SC are designed to treat plates (vertically positioned) in passage mode with any kind of shots (steel shots, cut wire, corundum, glass beads, ceramic beads…).

The machine is equipped with a main roller conveyor that permit the entrance/exit of the parts into/outo the blasting chamber with a series of idle wheels (placed along the complete height of 3 mt) for plate guiding. The nozzles are driven by a 2 indipendent 1 axis gantry arm that permit to cover both surfaces of the sheets. The number of nozzle is defined according the production rate and the complexity of the piece geometry. This machine is usefully for manual loading/unloading operation in horizontal mode. A tilting device (hydraulically driven) permit the vertical positioning of the plates. Both injection and pressure technology can be installed on such equipment. This machine is used for surface preparation, surface cleaning and roughening.

 PST 20 SCPST 30 SC
Free passage section dimension

100 x 2000(h) mm

100 x 3000(h) mm

External cabin dimension

5000x1200x3000(h) mm

5000x1200x4000(h) mm

Number of doors

10

10

Cartridges dust collector

2 x 9 cartridges each

2 x 9 cartridges each

Manual blasting station

No

No

Cyclon

Yes

Yes

Mechanical shot recirculation

Yes – with 3 different shot size

Yes – with 3 different shot size

Blasting/ Blowing guns

8 (ventury type) or 4 (pressure type)

8 (ventury type) or 4 (pressure type)

Compressed air consumption

8500 Nl/min

8500 Nl/min

Vibrating classifier

Yes

Yes